Processing...
Code: M16-PKA316M4FGCS

Review this product
$779.99
Quantity in Basket: None

Inventory: In Stock
Qty

Product Description

M16 FULL AUTO A3 FLAT TOP Receiver 16" M4 Parts Set Kit (Less Stripped LOWER Receiver Only) Set Includes ALL parts needed to Replace all parts on your M16 M4 Rifle less stripped lower receiver. Made up of Flat Top Upper Receiver plus 16" M4 Government Contour CARBINE BARREL with FLAT Gas Block. This 5.56 mm chambered barrel for an AR15 CAR15 Law Enforcement / Military carbine barrel is 16" long and threaded standard 1/2 x 28 tpi. Mounts on US Mfg A3 Flat Top Upper ..Comes with CAR LENGTH M4 type Fat hanguard, delta ring set and gas system parts..This chrome moly barrel by E.R. SHAW is, without question, one of the finest AR15/M16 type barrels made - This barrel is machined from Chrome-Moly Vanadium steel - hardened to Rockwell C26 to U. S. Gov't. Military Specification This barrel has the HARD Manganese Phosphate Finish: the U. S. Government's recommended protective finish for steel - which affords complete protection against exterior rust. This barrel is button rifled with 6 grooves and lands - right hand twist 1 turn in 9" - which have been found to give the best shooting results with the widest variety of ammunition & comes with the 1/2 x 28 tpi flash hider as shown. Also included are COMPLETE Bolt assembly and charging handle, Lower Receiver Small Parts Set with trigger group and Grip ... 6 Position M-4 Tactical Stock Assembly also included. Simply replace parts on your on your stripped M16 M4 lower and GO !!...Condition is Brand New .. Get yours NOW while we have these complete sets ! IN STOCK NOW READY TO SHIP! Parts are Sold as Replacement Parts for Registered Receiver Weapons Only. All NFA Rules Apply

Product Reviews

Customer Reviews
Average Customer Review: Not yet rated
Write an online review and share your thoughts with others.

There are no reviews

Shipping & Return Policy

Orders are generally shipped within 1 day after your order is processed.

Orders are processed Mon-Fri during normal business hours.

You may return damaged or defective merchandise within 10 days of the original purchase date for a full refund. We will also be glad to exchange the damaged merchandise for anything on our site of equal or lesser value.

If item is defective or incorrect please notify us within 10 days of receipt of merchandise.

We will NOT accept any returns or exchanges after 30 days from ship date of item.

We have a 20% restocking fee for all items returned within 30 days (NOT DEFECTIVE due to customer error), ONLY if items are NEW UNUSED UNOPENED and NOT damaged. Shipping & handling charges will NOT be refunded!

ALL SALES OF CLASS II DRILLING FIXTURES ARE FINAL NO RETURNS REFUNDS OR EXCHANGES ON THESE ITEMS

Defective DVDs will be replaced. No refunds on DVDs.

If for any reason you are not satisfied with your purchase, please contact us immediately at
 ftfindustries@msn.com

ALL RETURNS MUST BE ACCOMPANIED BY AN RMA NUMBER. Please email us for that information. ftfindustries@msn.com

Customer Service

We're Here To Help
Your satisfaction is important to us! Use the form below to email us your questions about products, online orders, store experiences and more.

Order Questions:
If you need help or have any other questions concerning your orders, please fill out the form or call: 828-313-0200.

Our Address:
FTF Industries Inc.
PO BOX 68
Hildebran, NC 28637 US
Phone: 828-313-0200

FAQ's

Ask A Question About This Product

Be the first to ask a question about this product.


Product Description

M16 FULL AUTO A3 FLAT TOP Receiver 16" M4 Parts Set Kit (Less Stripped LOWER Receiver Only) Set Includes ALL parts needed to Replace all parts on your M16 M4 Rifle less stripped lower receiver. Made up of Flat Top Upper Receiver plus 16" M4 Government Contour CARBINE BARREL with FLAT Gas Block. This 5.56 mm chambered barrel for an AR15 CAR15 Law Enforcement / Military carbine barrel is 16" long and threaded standard 1/2 x 28 tpi. Mounts on US Mfg A3 Flat Top Upper ..Comes with CAR LENGTH M4 type Fat hanguard, delta ring set and gas system parts..This chrome moly barrel by E.R. SHAW is, without question, one of the finest AR15/M16 type barrels made - This barrel is machined from Chrome-Moly Vanadium steel - hardened to Rockwell C26 to U. S. Gov't. Military Specification This barrel has the HARD Manganese Phosphate Finish: the U. S. Government's recommended protective finish for steel - which affords complete protection against exterior rust. This barrel is button rifled with 6 grooves and lands - right hand twist 1 turn in 9" - which have been found to give the best shooting results with the widest variety of ammunition & comes with the 1/2 x 28 tpi flash hider as shown. Also included are COMPLETE Bolt assembly and charging handle, Lower Receiver Small Parts Set with trigger group and Grip ... 6 Position M-4 Tactical Stock Assembly also included. Simply replace parts on your on your stripped M16 M4 lower and GO !!...Condition is Brand New .. Get yours NOW while we have these complete sets ! IN STOCK NOW READY TO SHIP! Parts are Sold as Replacement Parts for Registered Receiver Weapons Only. All NFA Rules Apply

Product Reviews

Customer Reviews
Average Customer Review: Not yet rated
Write an online review and share your thoughts with others.

There are no reviews

Shipping & Returns

Orders are generally shipped within 1 day after your order is processed.

Orders are processed Mon-Fri during normal business hours.

You may return damaged or defective merchandise within 10 days of the original purchase date for a full refund. We will also be glad to exchange the damaged merchandise for anything on our site of equal or lesser value.

If item is defective or incorrect please notify us within 10 days of receipt of merchandise.

We will NOT accept any returns or exchanges after 30 days from ship date of item.

We have a 20% restocking fee for all items returned within 30 days (NOT DEFECTIVE due to customer error), ONLY if items are NEW UNUSED UNOPENED and NOT damaged. Shipping & handling charges will NOT be refunded!

ALL SALES OF CLASS II DRILLING FIXTURES ARE FINAL NO RETURNS REFUNDS OR EXCHANGES ON THESE ITEMS

Defective DVDs will be replaced. No refunds on DVDs.

If for any reason you are not satisfied with your purchase, please contact us immediately at
 ftfindustries@msn.com

ALL RETURNS MUST BE ACCOMPANIED BY AN RMA NUMBER. Please email us for that information. ftfindustries@msn.com

Parts Warranty Info

We're Here To Help
Your satisfaction is important to us! Use the form below to email us your questions about products, online orders, store experiences and more.

Order Questions:
If you need help or have any other questions concerning your orders, please fill out the form or call: 828-313-0200.

Our Address:
FTF Industries Inc.
PO BOX 68
Hildebran, NC 28637 US
Phone: 828-313-0200

FAQ's

Ask A Question About This Product

Be the first to ask a question about this product.